VersaEdge Extra Tall (VEX)
The aluminum VersaEdge Extra Tall Stair Nose is 1.5″ tall to fit staircases or steps that require a longer overhang. It is available for use on flooring with an overall thickness* of up to 3/4” (19mm).
Surface Material: High-Wear Resistant Aluminum Oxide Laminate
Core Material: Aluminum
Length: 94″ Long
| Floor Thickness* | Install Type | Accessories Needed | Hardware Included |
| 1/16" - 3/4 " (1 - 19 mm) | None | None | |
| 3/32" - 5/32" (2 - 4 mm) | Flush | None | None |
| 3/16" - 9/32" (5 - 7 mm) | Flush | VT-VE(X)-Shim-5 - Sold Separately | None |
| 5/16" - 11/32" (8 - 10 mm) | Flush | VT-VE(X)-Shim-8 - Sold Separately | None |
| 1/2" (12 mm) | Flush | VT-VE(X)-Shim-12 - Sold Separately | None |
*With our stair molding, stair baseboards, and all other stair solutions, all references to flooring thickness refer to the total thickness of all members of the floor installation once laid upon the subfloor. This is typically comprised of the flooring plank (i.e., vinyl or laminate), the underlayment–either attached or loose lay, and any additional vapor barriers.
VersaEdge Extra Tall Hardware
VT-VE(X)-Shims
This Versatrim VT-VE(X) shim is available for optional use with our VersaEdge Extra Tall (VEX) for flush installations. We carry a variety of sizes to fit your needs, including Shim-5 for 5-7mm* floors, Shim-8 for 8-10mm floors*, and Shim-12 for 12mm* floors.
Core Material: Standard MDF/HDF
Length: 94″ Long
*With our stair nose molding, stair trim, and accessories, all references to flooring thickness refer to the total thickness of all members of the floor installation once laid upon the subfloor. This is typically comprised of the flooring plank (i.e., vinyl or laminate), the underlayment–either attached or loose lay, and any additional vapor barriers.