SlimTrim - Custom Slim Floor Molding
SlimTrim - Floor Edge Trim (3-in-1 Floor Molding)
Our SlimTrim 3-in-1 Floor Molding functions as a moisture-proof reducer, t-molding, and end cap on flooring with a lower profile. Use our SlimTrack and Versatrack Shims when installing on floors up to 1/4” (6.35mm) or our Dowel Tree on flooring up to 3/4” (19mm).
Surface Material: High-Wear Resistant Aluminum Oxide Laminate
Core Material: PVC
Length: 94″ Long
| Floor Thickness* | Packaging Option Needed | Hardware Included |
|---|---|---|
|
Up to 1/4" (6.35 mm) |
SLT-P29 |
Track & Shim |
|
As a T-Molding: 1/4" - 3/8" (6.35 - 9.5 mm) |
SLT-P54 |
Track & 2 Shims |
|
Up to 3/4" (19 mm) |
SLT-P32 |
1 Tree of 8 Dowels |
*With our slim laminate molding and all other flooring and stair solutions, all references to flooring thickness refer to the total thickness of all contributing members of the floor installation that’s laid upon the subfloor. This is typically comprised of the flooring plank (i.e., vinyl or laminate), the underlayment–either loose lay or fully attached, and any additional vapor barriers.
SlimTrim - Slim Floor Molding Hardware
Slim Track
At Versatrim, we designed our Slim Track to perfectly fit our Slim Trim solutions, so you can have the same floor transition trim on thin floors up to 1/8” (3mm) in thickness, as you would any other floor. To be used in conjunction with the Versatrack Shim with thicknesses of 1/8” (3mm) to 1/4” (6.35mm).
Material: Cold Roll Steel
Length: 94″ Long
Versatrack Shim
Our Versatrack Shim is designed to be used with our slim floor molding, as well as our other custom molding and trim products, with thicknesses varying from 15/32” (12mm) to 45/64” (18mm), depending upon the specific needs of your request.
Material: Standard HDF
Length: 94″ Long
Dowel Tree
The Versatrim Dowel Tree was designed for flooring up to 3/4” (19mm), giving our slim floor edge trim the right hardware for the job. This custom Dowel Tree comes as a tree of 8 dowels, which will cover one 94” long SlimTrim 3-in-1 floor molding with each dowel spaced approximately 12” apart and 1” from each end.
Material: High Density Polyethylene
Laminate Floor Molding Customized for Your Projects
When your project calls for a low profile variety of flooring, it can be difficult to find the slim floor molding that fits your aesthetic design and functional needs. At VersaTrim, we designed a line specially for projects like yours, so even flooring as slim as 1/4” (6.35mm) can get the finishing touches it deserves without putting you over budget or over your timeline.
For additional information on our floor edge trim, custom testing requests, and other flooring and stair solutions connect with us to learn more.
