End Cap Molding

End Cap
End Cap
With Track & Shim
(Sold Separately)

End Cap Molding

Available in both Standard and Moisture-Proof options!

When you need to transition from one color flooring to the next, or you’re transitioning from laminate to carpet, masonry (fireplaces), sliding doors, or other exterior door jams, you need a durable, custom laminate flooring end cap and installation hardware that’s perfectly coordinated with your existing flooring product.

Surface Material: High-Wear Resistant Aluminum Oxide Laminate

Core Material: Our Standard flooring end cap is made of moisture-resistant MDF, while our Moisture-Proof variety is an exterior grade composite wood product.

Length: 94″ Long

Floor Thickness* Accessories Needed Hardware Included
9/32" - 15/32" (7 - 12 mm)
15/32" - 5/8" (12 - 16 mm)
19/64" - 3/8" (7.5 - 9 mm)

*With our laminate flooring end caps and all other flooring and stair solutions, all references to flooring thickness refer to the total thickness of all members of the floor installation once laid upon the subfloor. This is typically comprised of the flooring plank (i.e., vinyl or laminate), the underlaymenteither attached or loose lay, and any additional vapor barriers.

End Cap Molding Hardware​

Versatrack (Metal Track)

Our Versatrack hardware is designed for use with flooring end caps made for floors with 9/32”-15/32” (7-12mm) thicknesses. It can also be used in conjunction with our Versatrack shim for flooring with thicknesses between 12/32” (12mm) to 5/8” (16mm). 

Material: Cold Roll Steel

Length: 94″ Long

For flooring thicker than 45/64” (18mm), please contact one of our customer service representatives for assistance with choosing the right end cap molding for your project.

Versatrack Shim

Our Versatrack Shim is designed to compliment our Versatrack end cap molding hardware and was created to work with floors from 15/32” to 5/8” (12-16mm) in thickness.

Material: Standard HDF

Length: 94″ Long

Thin Track – Versatrim Thin

At Versatrim, we designed our Thin Track as an alternative to the Versatrack for projects requiring thinner than average flooring. If you need end cap molding on floors with a thickness between 19/64” (7.5mm) and 3/8” (9.5mm), our Thin Track will help you get the job done. 

Material: Impact Polystyrene

Length: 94″ Long

If your project calls for flooring with a 7mm thickness, then you must use the Versatrack (Metal Track) in order to install Versatrim end molding. Contact our team with any questions you may have regarding which hardware will work for your needs.

Versatrim: Reliable Flooring End Caps

A job well done prioritizes the small details, like the transition molding between your different types of flooring. Your customers deserve a beautiful finished product and with VersaTrim, you can give it to them without needing to keep an inventory or over-ordering the product you need to wrap up your project.