SCAP-P29
Includes: 1 Track & 1 Shim
SCAP-P54
Includes: 1 Track & 2 Shims
Slim Cap - Square Nose (PVC End Cap)
Low profile End Cap for floors up to 1/2” (12.7 mm). End Caps are used to transition from flooring to carpet, masonry (fireplaces), sliding doors and other exterior door jams.
Surface Material: High-Wear Resistant Aluminum Oxide Laminate
Core Material: PVC
Length: 94″ Long
*With our square nose transition caps and all other flooring and stair solutions, all references to flooring thickness refer to the total thickness of all members of the floor installation once laid upon the subfloor. This is typically comprised of the flooring plank (i.e., vinyl or laminate), the underlayment–either attached or loose lay, and any additional vapor barriers.
Slim Cap - Square Nose Hardware
Slim Track
At Versatrim, we designed our Slim Track to perfectly fit the Slim Cap product, so you can have the same square nose molding on thin floors up to 1/8” (3mm) in thickness, as you would any other floor. To be used in conjunction with the Versatrack Shim with thicknesses of 1/8” (3mm) to 1/4” (6.35mm).
Material: Cold Roll Steel
Length: 94″ Long
Versatrack Shim
Our Versatrack Shim is designed to be used with our variety of slim square nose transition strips, as well as our other custom molding and trim products, with thicknesses varying from 15/32” (12mm) to 45/64” (18mm), depending upon the specific needs of your request.
Material: Standard HDF
Length: 94″ Long
*All references to flooring thickness refer to the total thickness of all members of the floor installation being laid upon the subfloor. This typically is comprised of the flooring plank, e.g. Vinyl or Laminate, the underlayment, either attached or loose lay and any additional vapor barriers.