Bullnose Shim
Our Bullnose Shim is to be used to install our Round Stair Nose molding (RSN), specifically on box staircases, to create a stabilized, rounded step.
Core Material: Standard MDF
Length: 94″ Long
VT-VE(X)-Shims
This Versatrim shim is available for optional use with our Round Stair Nose molding (RSN) and VersaEdge for flush installations. We carry a variety of sizes to fit your needs, including Shim-5 for 5-7mm* floors, Shim-8 for 8-10mm floors*, and Shim-12 for 12mm* floors.
Core Material: Standard MDF/HDF
Length: 94″ Long
Versatrim Shim (VT-Shim)
Used to raise the landing Stair Nose when used for 3/8"-1/2" (9.5-12.7 mm) Flooring.
Core Material: Standard MDF/HDF
Length: 94″ Long
VersaCap Hardware
Bullnose Shim-46
Our Bullnose Shim-46 is to be used to install our VersaCap Round, specifically on box staircases, to create a stabilized, rounded step.
Core Material: Standard MDF
Length: 46" Long
VersaCap Shim
The VersaCap Shim is to be used to install our VersaCap Edge and Square specifically on box staircases, to create a stabilized step.
Core Material: Standard MDF
Length: 46" Long
*With our stair nose molding, stair trim, and accessories, all references to flooring thickness refer to the total thickness of all members of the floor installation once laid upon the subfloor. This is typically comprised of the flooring plank (i.e., vinyl or laminate), the underlayment–either attached or loose lay, and any additional vapor barriers.