Flexible Polyurethane Moldings & Trim Solutions
Stainable, Paintable & Easy to Install!
At Versatrim, we understand that not all projects are straightforward. That’s why we created our exclusive line of VersaFlex products: the same great molding and trim products you already love, with the flexibility to fit any project’s unique needs and curves!
- Minimums: No minimums so you can order only what you need!
- Lead Time: VersaFlex flexible moldings and trims ship from our facility within 1 business day for orders up to 5 pieces. Wall Base & Colonial Base are Special Order Items. Longer lead times may apply.
- Shipping: The same shipping rate & transit time applies as with our standard molding products
The VersaFlex Full Line of Flexible Trim & Moldings
At Versatrim, our eight different flexible molding and trim options, in addition to all our flooring and stair solutions, references flooring thickness as the total thickness of all members of the floor installation once laid upon the subfloor. This is typically composed of the flooring plank (i.e., vinyl or laminate), the underlayment–either attached or loose lay, and any additional vapor barriers.
VersaFlex T-Molding
When your project needs you to join two laminate floors in adjoining rooms, either through a doorway or other entrance at an angle or on a curve, the VersaFlex T-Molding is the flexible vinyl floor trim you need. The Versatrim T-Molding is the best solution when your two different floors are approximately the same height.
Core Material: Polyurethane Composite
Surface: Stainable and Paintable
Length: 94″
Available In:
- 1020336 – Oak Wood Grain
VersaFlex Reducer
If you have a project that requires you to transition from laminate floors to other floors of a different height (with a minimum height difference of ¼”) at a curve, you need the VersaFlex reducer that gives the transition a seamless look and feel that lasts for years.
Core Material: Polyurethane Composite
Surface: Stainable and Paintable
Length: 94″
Available In:
- 1020336 – Oak Wood Grain
VersaFlex End Cap
When your project requires you to transition from one color flooring to the next, or to transition from laminate to carpet, masonry (fireplaces), sliding doors, or other exterior door jams, you need a reliable VersaFlex end cap that installs easily and moves with you.
Core Material: Polyurethane Composite
Surface: Stainable and Paintable
Length: 94″
Available In:
- 1020336 – Oak Wood Grain
VersaFlex Corner Molding
Corner Moldings are used for corners and edges.
Core Material: Polyurethane Composite
Surface: Stainable and Paintable
Length: 94″
Available In:
- 1020336 – Oak Wood Grain
VersaFlex Quarter Round
At Versatrim, our Quarter Rounds are used to conceal the required space left between the wall and the laminate flooring to ensure it keeps up with building expansion over time. The VersaFlex version can also be used to round fireplaces, or the bottom of rounded staircases.
Core Material: Polyurethane Composite
Surface: Stainable and Paintable
Length: 94″
Available In:
- 1020335 – Paint Grade (No Grain)
- 1020336 – Oak Wood Grain
VersaFlex Base Shoe
The VersaFlex Base Shoe, like the Quarter Round, is used to conceal the required expansion space between the wall and the laminate flooring, hiding the unsightly seam with a more visually appealing flexible trim.
Core Material: Polyurethane Composite
Surface: Stainable and Paintable
Length: 94″
Available In:
- 1020335 – Paint Grade (No Grain)
- 1020336 – Oak Wood Grain
VersaFlex Wall Base*
Base moldings conceal the joint between an interior wall and the floor. They may also be used to protect walls from daily wear-and-tear caused by scuffs and cleaning solutions.
Core Material: Polyurethane Composite
Surface: Stainable and Paintable
Length: 94″
Available In:
- 1020335 – Paint Grade (No Grain)
- 1020336 – Oak Wood Grain
VersaFlex Colonial Base*
Like wall bases, our colonial base is a flexible molding that conceals the joint between an interior wall and the floor. They may also be used to protect walls from daily wear-and-tear caused by scuffs and cleaning solutions. At 4-⅞ inches, our VersaFlex Colonial Base is a little taller than our standard Wall Base.
Core Material: Polyurethane Composite
Surface: Stainable and Paintable
Length: 94″
Available In:
- 1020335 – Paint Grade (No Grain)
- 1020336 – Oak Wood Grain
Special Order Item. Longer lead times may apply.
Installing & Maintaining Your Flexible Trim & Molding
By leveraging our moisture-resistant polyurethane composite material, VersaFlex moldings are designed for both interior and exterior use. However, Versatrim still recommends the use of a paint or gel stain and sealer for all applications. Here are a few considerations to keep in mind when working with VersaFlex products during a variety of installation and maintenance tasks:
HOW TO INSTALL
USE: VersaFlex moldings are designed for interior and exterior use. This product is stable and will not absorb moisture. However, the use of a paint or gel stain and sealer is recommended for all applications.
MACHINING: Conventional woodworking tools can be used with this material. Material can be cut, sanded, and shaped with ease. Miter saws work well when trimming this material. As with all types of trim material, use care when marking and cutting.
CONDITIONING: Conditioning VersaFlex in a warm room (70 to 75°) for 1/2 a day will make it more flexible.
FASTENING: Always install VersaFlex moldings in a relaxed position. Use construction or panel adhesive or mastic type glue continuously on back side and nails to secure molding material in place until adhesive bonds.
- DO NOT use staples to fasten material.
- Keep nails to a minimum, no closer than 6” between nails.
- Do not nail closer than 3/8” from edge of molding.
CLEANING: Prior to finishing, clean the molding by wiping with a cloth using soap and water, paint thinner or any mild solvent to clean any dirt or grease that may have accumulated during installation.
PAINT & STAINING: VersaFlex is paint grade. Moldings with the Oak Wood Grain or Paint Grade (No Grain) can be painted with a latex or oil-based paint. Only moldings with the Oak Wood Grain can stained, using a gel type stain.
1) Surface Preparation:
- Sand with fine grit paper (150) before staining to ensure the VersaFlex moldings accepts color pigments effectively.
2) Recommended Stain Types:
- Wiping stains (preferably gel stains for best coverage).
- Avoid spray or flood/dip stains.
3) Drying Time:
- Gel stains provide optimal coverage but require longer drying times.
- Water-based or solvent-based wiping stains dry faster if quick drying is required but may need multiple applications due to their thinner pigment application compared to gel stains.
4) Application Method:
- Apply stain, then immediately wipe off excess to leave a thin coat, allowing quicker drying.
- Additional thin coats can be applied as needed to achieve desired color intensity.
5) After Staining:
- Allow stain to thoroughly cure before applying a clear urethane topcoat.
Important Note: Due to the less absorbent nature of our urethane-based VersaFlex moldings compared to wood, conducting test samples prior to final application is strongly recommended to determine suitability and drying times for specific staining conditions.