Transition Moldings
Slim Trim
Our SlimTrim 3-in-1 Molding functions as a moisture-proof Reducer, T-Molding, and End Cap. Comes with SlimTrack & Versatrack Shim for floors up to 1/4” (6.35mm)* or dowels for floors up to 3/4” (19mm)*.
Surface Material: High Wear Resistant Aluminum Oxide Laminate
Core Material: PVC
Length: 94″ Long
| Floor Thickness* | Packaging Option Needed | Hardware Included |
|---|---|---|
|
Up to ¼" (6.35 mm) |
SLT-P29 |
Track & Shim |
|
As a T-Molding: ¼" - ⅜" (6.35 - 9.5 mm) |
SLT-P54 |
Track & 2 Shims |
|
Up to ¾" (19 mm) |
SLT-P32 |
1 Tree of 8 Dowels |
Slim Cap
Low profile, moisture-proof, PVC End Cap for floors up to 1/2” (12.7mm)*.
Surface Material: High Wear Resistant Aluminum Oxide Laminate
Core Material: PVC
Length: 94″ Long
| Floor Thickness* | Packaging Option Needed | Hardware Included |
|---|---|---|
|
Up to 3/8" (9.5 mm) |
SCAP-P29 |
Track & Shim |
|
⅜" - ½" (9.5 - 12.7 mm) |
SCAP-P54 |
Track & 2 Shims |
T-Molding
Available as Standard and Moisture-Proof
T-Moldings are commonly used in doorways to join two laminate floors in adjoining rooms. Also recommended when making a transition from laminate floor to another floor that is approximately the same height.
Surface Material: High Wear Resistant Aluminum Oxide Laminate
Core Material: Standard: Moisture Resistant MDF. Moisture Proof: Exterior Grade Composite Wood Product
Length: 94″ Long
| Floor Thickness* | Accessories Needed | Hardware Included |
|---|---|---|
|
23/64" - 15/32" (9 - 12 mm) |
None |
|
|
15/32" - 19/32" (12 - 16 mm) |
None |
|
|
19/32" - 45/64" (15 - 18 mm) |
None |
|
|
19/64" - 3/8" (7.5 - 9 mm) |
None |
Reducer
Available as Standard and Moisture-Proof
Reducers are used to transition from laminate floors to floors of different height with a minimum height difference of 1/4” (6.35mm)*. Available as Standard or Moisture Proof.
Surface Material: High Wear Resistant Aluminum Oxide Laminate
Core Material: Standard: Moisture Resistant MDF. Moisture Proof: Exterior Grade Composite Wood Product
Length: 94″ Long
| Floor Thickness* | Accessories Needed | Hardware Included |
|---|---|---|
|
932" - 15/32" (7 - 12 mm) |
None |
|
|
15/32" - 5/8" (12 - 16 mm) |
None |
|
|
19/64" - 3/8" (7.5 - 9 mm) |
None |
End Cap
Available as Standard and Moisture-Proof
End Caps are used to transition from laminate to carpet, masonry (fireplaces), sliding doors and other exterior door jambs. Available as Standard or Moisture Proof.
Surface Material: High Wear Resistant Aluminum Oxide Laminate
Core Material: Standard: Moisture Resistant MDF. Moisture Proof: Exterior Grade Composite Wood Product
Length: 94″ Long
| Floor Thickness* | Accessories Needed | Hardware Included |
|---|---|---|
|
9/32" - 15/32" (7 - 12 mm) |
None |
|
|
15/32" - 5/8" (12 - 16 mm) |
None |
|
|
19/64" - 3/8" (7.5 - 9 mm) |
None |
*All references to flooring thickness refer to the total thickness of all members of the floor installation being laid upon the subfloor. This typically is comprised of the flooring plank, e.g. Vinyl or Laminate, the underlayment, either attached or loose lay and any additional vapor barriers.
Accessories
Slim Track
To be used with SlimTrim for floors up to 1/8” (3mm)* thickness. Also, used in conjunction with the Versatrack Shim for 1/8“-1/4”** (3-6.35mm)*. See illustrations below for details.
Material: Cold Roll Steel
Length: 94″ Long
Versatrack
To be used with T-Molding for floors from 23/64”-15/32“ (9-12 mm) thickness* and Reducer & End Cap for floors from 9/32”-15/32“ (7-12 mm)* thickness. Can also be used with T-Molding in conjunction with the Versatrack shim for floors from 15/32”-45/64” (12-18 mm)* thickness and with Reducer & End Cap in conjunction with the Versatrack shim for floors from 15/32” -5/8” (12-16 mm)* thickness.
Material: Cold Roll Steel
Length: 94″ Long
For floors thicker than 45/64” (18 mm)* for T-Molding and 5/8” (16 mm)* for Reducer & End Cap, please feel free to call one of our customer service representatives for assistance.
Versatrack Shim
To be used with T-Molding in conjunction with the Versatrack for floors from 15/32” – 45/64” (12-18 mm)* thickness and with Reducer & End Cap in conjunction with the Versatrack for floors from 15/32” – 5/8” (12-16 mm)* thickness.
Material: Standard HDF
Length: 94″ Long
Thin Track – Versatrim Thin
To be used with T-Molding, Reducer, and End Cap for floors from 19/64” – 3/8” (7.5-9.5 mm)*.
Material: Impact Polystyrene
Length: 94″ Long
For 7 mm* floors you must use the Versatrack metal track
Dowel Tree
To be used with SlimTrim for floors up to 3/4” (19mm)*. Comes as a tree of 8 dowels. One tree covers one 94″ long Slim Trim molding with each dowel spaced approximately 12″ apart and 1″ from each end.
Material: High Density Polyethylene
*All references to flooring thickness refer to the total thickness of all members of the floor installation being laid upon the subfloor. This typically is comprised of the flooring plank, e.g. Vinyl or Laminate, the underlayment, either attached or loose lay and any additional vapor barriers.
