Round Stair Nose Molding (RSN)
In your project, you may need to transition from one color flooring to the next, or to transition from laminate to carpet, masonry (fireplaces), sliding doors, or other exterior door jams. When you’re using slimmer flooring, you need custom square nose molding and installation hardware with a low-profile and moisture-proof material that fits your unique needs. The VersaTrim slim caps work with floors up to ½” (12.7mm), so we’ve got you covered.
Surface Material: High-Wear Resistant Aluminum Oxide Laminate
Core Material: PVC
Length: 94″ Long
| Floor Thickness* | Install Type | Accessories Needed | Hardware Included |
| 1/16" - 5/16 " (1 - 8 mm) | None | None | |
| 1/16" - 5/16 " (1 - 8 mm) | Overlap on Box Stair Case | Bull Nose Shim | None |
| 3/32" - 5/32" (2 - 4 mm) | Flush | None | None |
| 3/16" - 9/32" (5 - 7 mm) | Flush | VT-VE(X)-Shim-5 - Sold Separately | None |
| 5/16" - 11/32" (8 - 10 mm) | Flush | VT-VE(X)-Shim-8 - Sold Separately | None |
| 1/2" (12 mm) | Flush | VT-VE(X)-Shim-12 - Sold Separately | None |
VersaEdge
The VersaEdge Stair Nose molding solution offers a flush fit with most flooring thicknesses and provides a project with a clean, beautiful look. It is available for use on flooring with an overall thickness* of up to 3/4” (19mm).
Surface Material: High-Wear Resistant Aluminum Oxide Laminate
Core Material: PVC
Length: 94" Long
| Floor Thickness* | Install Type | Accessories Needed | Hardware Included |
| 1/16" - 3/4 " (1 - 19 mm) | None | None | |
| 3/32" - 5/32" (2 - 4 mm) | Flush | None | None |
| 3/16" - 9/32" (5 - 7 mm) | Flush | VT-VE(X)-Shim-5 - Sold Separately | None |
| 5/16" - 11/32" (8 - 10 mm) | Flush | VT-VE(X)-Shim-8 - Sold Separately | None |
| 1/2" (12 mm) | Flush | VT-VE(X)-Shim-12 - Sold Separately | None |
VersaEdge Extra Tall (VEX)
The aluminum VersaEdge Extra Tall Stair Nose is 1.5" tall to fit staircases or steps that require a longer overhang. It is available for use on flooring with an overall thickness* of up to 3/4” (19mm).
Surface Material: High-Wear Resistant Aluminum Oxide Laminate
Core Material: Aluminum
Length: 94" Long
| Floor Thickness* | Install Type | Accessories Needed | Hardware Included |
| 1/16" - 3/4 " (1 - 19 mm) | None | None | |
| 3/32" - 5/32" (2 - 4 mm) | Flush | None | None |
| 3/16" - 9/32" (5 - 7 mm) | Flush | VT-VE(X)-Shim-5 - Sold Separately | None |
| 5/16" - 11/32" (8 - 10 mm) | Flush | VT-VE(X)-Shim-8 - Sold Separately | None |
| 1/2" (12 mm) | Flush | VT-VE(X)-Shim-12 - Sold Separately | None |
Moisture Proof Stair Nose
The Moisture-Proof Stair Nose combines style and function to enhance the beauty of a staircase or step.
Surface Material: High-Wear Resistant Aluminum Oxide Laminate
Core Material: Exterior Grade Composite Wood Product
Length: 94" Long
*With our stair molding, stair baseboards, and all other stair solutions, all references to flooring thickness refer to the total thickness of all members of the floor installation once laid upon the subfloor. This is typically comprised of the flooring plank (i.e., vinyl or laminate), the underlayment–either attached or loose lay, and any additional vapor barriers.
Stair Trim Hardware
Bullnose Shim
Our Bullnose Shim is to be used to install our Round Stair Nose molding (RSN), specifically on box staircases, to create a stabilized, rounded step.
Core Material: Standard MDF
Length: 94" Long
VT-VE(X)-Shims
This Versatrim shim is available for optional use with our Round Stair Nose molding (RSN), VersaEdge, and VersaEdge Extra Tall (VEX) for flush installations. We carry a variety of sizes to fit your needs, including Shim-5 for 5-7mm* floors, Shim-8 for 8-10mm floors*, and Shim-12 for 12mm* floors.
Core Material: Standard MDF/HDF
Length: 94" Long
Versatrim Shim (VT-Shim)
Used to raise the landing Stair Nose when used for 3/8"-1/2" (9.5-12.7 mm) Flooring.
Core Material: Standard MDF/HDF
Length: 94" Long
*With our stair nose molding, stair trim, and accessories, all references to flooring thickness refer to the total thickness of all members of the floor installation once laid upon the subfloor. This is typically comprised of the flooring plank (i.e., vinyl or laminate), the underlayment–either attached or loose lay, and any additional vapor barriers.
VersaCap: Matching Stair Tread Solutions
Always Flush & Always a Perfect Match
VersaCap Edge & Square Stair Treads
Caps are Made with Your Actual Flooring to Perfectly Match!
The VersaCap is used to create matching, flush stair treads & returns that perfectly match your floor to give your staircase an elegant cohesive look.
VersaCap is available in three profile types depending on your flooring and project needs:
- VersaCap Edge - The Edge has a low profile height of 1-⅞"
- VersaCap Square - The Square a taller profile height of 2-⅜"
- VersaCap Round - The Round has a height of 1-¾"
*Flooring thicknesses vary, so to find the interior height dimension of your VersaCap stair tread, measure the thickness of your floor, multiply it by two, and subtract it from the exterior height.
**VersaCaps can be produced in various lengths, depending upon the actual floor length. However, regardless of that, the maximum length for a VersaCap is 46”.
VersaCap Hardware
Bullnose Shim-46
Our Bullnose Shim-46 is to be used to install our VersaCap Round, specifically on box staircases, to create a stabilized, rounded step.
Core Material: Standard MDF
Length: 46" Long
VersaCap Shim
The VersaCap Shim is to be used to install our VersaCap Edge and Square specifically on box staircases, to create a stabilized step.
Core Material: Standard MDF
Length: 46" Long