Caps are Made with Your Actual Flooring to Perfectly Match!
The VersaCap is used to create matching, flush stair treads & returns that perfectly match your floor to give your staircase an elegant cohesive look. VersaCap is available in the following profiles:
- VersaCap Edge - The Edge has a low profile height of 1-7/8"
- VersaCap Square - The Square a taller profile height of 2-3/8"
- VersaCap Round - The Rounds has a low profile height of 1-3/4"
Order your flooring plank to complete your tread! Available with a cap purchase only and will be cut to the size of the cap.
Lead Time: Up to 10 business days once flooring has been received and order has been placed.
1 Piece Minimum per order
VersaCaps are made-to-order: Once an order is placed it cannot be canceled and the product cannot be returned.
Versatrim produces VersaCaps and Versatrim Treads for manufacturers, retailers, certified installers or contractors. End Consumers should reach out to your local retailer/contractor for purchase.
VersaCap Edge
Like the VersaCap Square, our VersaCap Edge is made from the actual floor but offers a slimmer profile at 1-7/8” height.
Minimum Plank Width: 5”
Length: Cap length depends on plank size.
Width: Cap width is determined by plank width. See table below.
VersaCap Square
The VersaCap Square is used to create matching, flush stair treads & returns that perfectly match your floor to give your staircase an elegant cohesive look.
Minimum Plank Width: 6”
Length: Cap length depends on plank size.
Width: Cap width is determined by plank width. See table below.
| Plank Width | VersaCap Width** |
| 6" to 6.99"Plank | |
| >=7" Plank | 4" Cap |
VersaCap Round - New Profile Available Now!
Like the VersaCap Square and Edge, the VersaCap Round is made from the actual floor. It offers an elegant rounded edge to enhance your stair treads.
Minimum Plank Width: 6”
Length: Cap length depends on plank size.
Width: Cap width is determined by plank width. See table below.
| Plank Width | VersaCap Width** |
| 6" to 6.99"Plank | |
| >=7" Plank | 5" Cap |
*Measure floor thickness, multiply by 2, subtract from outside height to get inside dimension.
**The VersaCap width depends on the plank width and is synchronized with the Versatrim Tread program. See Width Tables for each product to determine width.
VersaCap Hardware
Bullnose Shim-46
Our Bullnose Shim-46 is to be used to install our VersaCap Round, specifically on box staircases, to create a stabilized, rounded step.
Core Material: Standard MDF
Length: 46" Long
VersaCap Shim
The VersaCap Shim is to be used to install our VersaCap Edge and Square specifically on box staircases, to create a stabilized step.
Core Material: Standard MDF
Length: 46" Long